Open Access
Review
Numéro |
OCL
Volume 29, 2022
Technological challenges in oilseed crushing and refining / Défis technologiques de la trituration et du raffinage des oléagineux
|
|
---|---|---|
Numéro d'article | 6 | |
Nombre de pages | 12 | |
DOI | https://doi.org/10.1051/ocl/2021048 | |
Publié en ligne | 11 janvier 2022 |
- Akinoso R, Raji AO, Igbeka JC. 2009. Effects of compressive stress, feeding rate and speed of rotation on palm kernel oil yield. Journal of Food Engineering 93(4): 427–430. [CrossRef] [Google Scholar]
- Bako T, Enyi OS, Imolemhe UV. 2020. Mathematical modeling of mechanical horizontal screw oil extractor. Agricultural Engineering International: CIGR Journal 22(2): 244–254. [Google Scholar]
- Bargale PC, Sosulski K, Sosulski FW. 2000. Enzymatic hydrolysis of soybean for solvent and mechanical oil extraction. Journal of Food Process Engineering 23(4): 321–327. [CrossRef] [Google Scholar]
- Bogaert L. 2017. Étude et modélisation du pressage continu des graines oléagineuses. Doctoral dissertation. Compiègne. [Google Scholar]
- Bogaert L, Mathieu H, Mhemdi H, Vorobiev E. 2018. Characterization of oilseeds mechanical expression in an instrumented pilot screw press. Industrial Crops and Products 121: 106–113. [CrossRef] [Google Scholar]
- Bouallegue K, Allaf T, Van CN, Ben R. 2016. Impact of texturing/cooling by Instant controlled pressure drop DIC on pressing and/or solvent extraction of vegetal oil. Int J Eng Res 2(1): 12. [Google Scholar]
- Carré P. 2021. Naturalness in the production of vegetable oils and proteins. OCL 28: 10. [CrossRef] [EDP Sciences] [Google Scholar]
- Chapuis A, Blin J, Carré P, Lecomte D. 2014. Separation efficiency and energy consumption of oil expression using a screw-press: the case of Jatropha curcas L. seeds. Industrial Crops and Products 52: 752–761. [CrossRef] [Google Scholar]
- Deli S, Masturah FM, Aris TY, Nadiah WW. 2011. The effects of physical parameters of the screw press oil expeller on oil yield from Nigella sativa L seeds. International Food Research Journal 18(4): 1367. [Google Scholar]
- Demarco A, Gibon V. 2020. Overview of the soybean process in the crushing industry. OCL 27: 60. [EDP Sciences] [Google Scholar]
- Dufaure C, Leyris J, Rigal L, Mouloungui Z. 1999. A twin-screw extruder for oil extraction: I. Direct expression of oleic sunflower seeds. Journal of the American Oil Chemists’ Society 76(9): 1073–1079. [CrossRef] [Google Scholar]
- Evangelista RL. 2009. Oil extraction from lesquerella seeds by dry extrusion and expelling. Industrial Crops and Products 29(1): 189–196. [CrossRef] [Google Scholar]
- Evangelista RL, Cermak SC. 2007. Full-press oil extraction of cuphea (PSR23) seeds. Journal of the American Oil Chemists’ Society 84(12): 1169–1175. [Google Scholar]
- Fadhlullah M, Widiyanto SNB, Restiawaty E. 2015. The potential of nyamplung (Calophyllum inophyllum L.) seed oil as biodiesel feedstock: effect of seed moisture content and particle size on oil yield. Energy Procedia 68: 177–185. [CrossRef] [Google Scholar]
- Fakayode OA, Ajav EA. 2019. Development, testing and optimization of a screw press oil expeller for moringa (Moringa oleifera) seeds. Agricultural Research 8(1): 102–115. [CrossRef] [Google Scholar]
- Florapower. 2021. Peeled seeds pressing. Available from https://www.florapower.de/en/technologies/peeled-seeds-pressing/ (last consult, May 2021). [Google Scholar]
- Gunstone FD. 2011. Production and trade of vegetable oils. Vegetable oils in food technology: composition, properties and uses (2, 1-21). John Wiley & Sons, 376 p. [CrossRef] [Google Scholar]
- Herak D, Gurdil G, Sedlacek A, Dajbych O, Simanjuntak S. 2010. Energy demands for pressing Jatropha curcas L. seeds. Biosystems Engineering 106(4): 527–534. [CrossRef] [Google Scholar]
- Ibrahim SM, Abed KA, Gad MS, Hashish HA. 2017. Optimum oil yield from Egyptian Jatropha seeds using screw press. Int J Mech Mechatron Eng 17(1): 47–56. [Google Scholar]
- Kabutey A, Herak D, Ambarita H, Sigalingging R. 2019. Modeling of linear and non-linear compression processes of sunflower bulk oilseeds. Energies 12(15): 2999. [CrossRef] [Google Scholar]
- Kabutey A, Herak D, Mizera C, Hrabe P. 2018. Mathematical description of loading curves and deformation energy of bulk oil palm kernels. Agronomy Research 16(4): 1686–1697. [Google Scholar]
- Karaj S, Müller J. 2011. Optimizing mechanical oil extraction of Jatropha curcas L. seeds with respect to press capacity, oil recovery and energy efficiency. Industrial Crops and Products 34(1): 1010–1016. [CrossRef] [Google Scholar]
- Kartika IA, Pontalier PY, Rigal L. 2005. Oil extraction of oleic sunflower seeds by twin screw extruder: influence of screw configuration and operating conditions. Industrial Crops and Products 22(3): 207–222. [CrossRef] [Google Scholar]
- Khan LM, Hanna MA. 1983. Expression of oil from oilseeds—a review. Journal of Agricultural Engineering Research 28(6): 495–503. [CrossRef] [Google Scholar]
- Lanoisellé JL, Vorobyov EI, Bouvier JM, Pair G. 1996. Modeling of solid/liquid expression for cellular materials. AIChE Journal 42(7): 2057–2068. [CrossRef] [Google Scholar]
- Le Cadre P, Pressenda F, Labalette F, Peyronnet C. 2015. Valorisation de tourteaux de soja issus d’une production locale non OGM chez les fabricants d’aliments. OCL 22(5): D507. [CrossRef] [EDP Sciences] [Google Scholar]
- Li S, Zhang Y, Liu X. 2010. Development of a twin-screw oil press with double-step multiple-stage squeezing chamber. Transactions of the Chinese Society of Agricultural Engineering 26(8): 102–107. [Google Scholar]
- Li W, Huang F, Gu Q, Gan W. 2007. Research and application of twin-screw expeller for cold pressing of de-hulled rapeseed. In: The 12th International Rapeseed Congress, Wuhan, China. USA: Science Press, pp. 213–216. [Google Scholar]
- Liu R, Xiao Z, Li C, et al. 2017. Calculation of equivalent friction coefficient for castor seed by single screw press. In: IOP Conference Series: Earth and Environmental Science. IOP Publishing, Vol. 81, No. 1, p. 012185. [CrossRef] [Google Scholar]
- Martínez ML, Marín MA, Faller CMS, Revol J, Penci MC, Ribotta PD. 2012. Chia (Salvia hispanica L.) oil extraction: study of processing parameters. LWT-Food Science and Technology 47(1): 78–82. [CrossRef] [Google Scholar]
- Moreau RA, Johnston DB, Hicks KB. 2005. The influence of moisture content and cooking on the screw pressing and prepressing of corn oil from corn germ. Journal of the American Oil Chemists’ Society 82(11): 851–854. [CrossRef] [Google Scholar]
- Mridula D, Saha D, Gupta RK, Bhadwal S. 2019. Oil expelling of dehulled sunflower: Optimization of screw pressing parameters. Journal of Food Processing and Preservation 43(1): e13852. [CrossRef] [Google Scholar]
- Murase T, Iwata M, Wakita M, Adachi T, Hayashi N, Shirato M. 1987. Variable-pressure/variable rate expression of semisolid materials. J Chem Eng Jpn 20: 603–608. [CrossRef] [Google Scholar]
- Naeem MA, Hashish HA, Zahran HA. 2017. Optimize the Roselle (Hibiscus sabdariffa L.) seeds oil extraction using screw press. Egypt J Nutr 32(4): 29–48. [Google Scholar]
- Olayanju TA, Akinoso R, Oresanya MO. 2006. Effect of wormshaft speed, moisture content and variety on oil recovery from expelled beniseed. Agricultural Engineering International: CIGR Journal 8. [Google Scholar]
- Patil RT, Ali N. 2006. Effect of pre-treatments on mechanical oil expression of soybean using a commercial oil expeller. International Journal of Food Properties 9(2): 227–236. [CrossRef] [Google Scholar]
- Pedretti EF, Del Gatto A, Pieri S, et al. 2019. Experimental study to support local sunflower oil chains: production of cold pressed oil in Central Italy. Agriculture 9(11): 1–12. [Google Scholar]
- Rombaut N, Savoire R, Thomasset B, Castello J, Van Hecke E, Lanoisellé JL. 2015. Optimization of oil yield and oil total phenolic content during grape seed cold screw pressing. Industrial Crops and Products 63: 26–33. [CrossRef] [Google Scholar]
- Sarkis JR, Boussetta N, Tessaro IC, Marczak LDF, Vorobiev E. 2015. Application of pulsed electric fields and high voltage electrical discharges for oil extraction from sesame seeds. Journal of Food Engineering 153: 20–27. [CrossRef] [Google Scholar]
- Shilong L, Xiefang L. 2011. Cold-pressed oil extraction of camellia seeds. In: 2011 International Conference on New Technology of Agricultural. IEEE, pp. 135–138. [CrossRef] [Google Scholar]
- Shirato M, Iwata M, Wakita M, Murase T, Hayashi N. 1987. Constant-rate expression of semisolid materials. J Chem Eng Jpn 20: 1–6. [CrossRef] [Google Scholar]
- Sigalingging R, Herák D, Kabutey A, Čestmír M, Divišová M. 2014. Tangent curve function description of mechanical behaviour of bulk oilseeds: a review. Scientia Agriculturae Bohemica 45(4): 259–264. [Google Scholar]
- Singh KK, Wiesenborn D, Kangas N, Tostenson K. 2002a. Characterization of preparation parameters for improved screw pressing of crambe seed. Transactions of the ASAE 45(4): 1029. [Google Scholar]
- Singh KK, Wiesenborn DP, Tostenson K, Kangas N. 2002b. Influence of moisture content and cooking on screw pressing of crambe seed. Journal of the American Oil Chemists’ Society 79(2): 165–170. [CrossRef] [Google Scholar]
- Singh KK, Wiesenborn D, Kangas N, Tostenson K. 2004. Screw pressing characteristics of dehulled crambe seed. Transactions of the ASAE 47(1): 199. [CrossRef] [Google Scholar]
- Soto C, Chamy R, Zuniga ME. 2007. Enzymatic hydrolysis and pressing conditions effect on borage oil extraction by cold pressing. Food Chemistry 102(3): 834–840. [CrossRef] [Google Scholar]
- Tostenson K, Wiesenborn D, Lipp D, Kangas N, Zheng Y. 2004. Start-up approaches and performance monitoring for screw-pressing flaxseed oil. In: 2004 ASAE Annual Meeting. American Society of Agricultural and Biological Engineers, p. 1. [Google Scholar]
- Turkay S, Gurbuz H. 2013. A new strategy for edible vegetable oil production. Lipid Technology 25(1): 11–13. [CrossRef] [Google Scholar]
- Uitterhaegen E, Evon P. 2017. Twin-screw extrusion technology for vegetable oil extraction: a review. Journal of Food Engineering 212: 190–200. [CrossRef] [Google Scholar]
- Uquiche E, Jeréz M, Ortíz J. 2008. Effect of pretreatment with microwaves on mechanical extraction yield and quality of vegetable oil from Chilean hazelnuts (Gevuina avellana Mol). Innovative Food Science & Emerging Technologies 9(4): 495–500. [CrossRef] [Google Scholar]
- Vadke VS, Sosulski FW. 1988. Mechanics of oil expression from canola. Journal of the American Oil Chemists’ Society 65(7): 1169–1176. [Google Scholar]
- Venkitasamy C, Teh HE, Atungulu GG, McHugh TH, Pan Z. 2014. Optimization of mechanical extraction conditions for producing grape seed oil. Transactions of the ASABE 57(6): 1699–1705. [Google Scholar]
- Ward JA. 1976. Processing high oil content seeds in continuous screw presses. Journal of the American Oil Chemists’ Society 53(6): 261–264. [CrossRef] [Google Scholar]
- Wiesenborn D, Doddapaneni R, Tostenson K, Kangas N. 2001. Cooking indices to predict screw-press performance for crambe seed. Journal of the American Oil Chemists’ Society 78(5): 467–471. [CrossRef] [Google Scholar]
- Willems P, Kuipers NJM, De Haan AB. 2008. Hydraulic pressing of oilseeds: experimental determination and modeling of yield and pressing rates. Journal of Food Engineering 89(1): 8–16. [CrossRef] [Google Scholar]
- Zdanowska P, Dróżdż B, Janakowski S, Derewiaka D. 2019. Impact of preliminary ultrasound treatment of rape seeds on the pressing process and selected oil characteristics. Industrial Crops and Products 138: 111572. [CrossRef] [Google Scholar]
- Zheng YL, Wiesenborn DP, Tostenson K, Kangas N. 2003. Screw pressing of whole and dehulled flaxseed for organic oil. Journal of the American Oil Chemists’ Society 80(10): 1039–1045. [CrossRef] [Google Scholar]
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.