Open Access
Numéro
OCL
Volume 23, Numéro 5, September-October 2016
Numéro d'article D505
Nombre de pages 13
Section Dossier: New perspectives of European oleochemistry / Les nouvelles perspectives de l’oléochimie européenne
DOI https://doi.org/10.1051/ocl/2016034
Publié en ligne 12 août 2016
  • Abdillahi H, Chabrat E, Rouilly A, Rigal L. 2013. Influence of citric acid on thermoplastic wheat flour/poly(lactic acid) blends. II. Barrier properties and water vapor sorption isotherms. Ind. Crops Prod. 50: 104–111. [CrossRef] [Google Scholar]
  • Amalia Kartika I, Pontalier PY, Rigal L. 2005. Oil extraction of oleic sunflower seeds by twin screw extruder: influence of screw configuration and operating conditions. Ind. Crops Prod. 22: 207–222. [CrossRef] [Google Scholar]
  • Amalia Kartika I, Pontalier PY, Rigal L. 2006. Extraction of sunflower oil by twin screw extruder: screw configuration and operating conditions effects. Bioresour. Technol. 97: 2302–2310. [Google Scholar]
  • Amalia Kartika I, Pontalier PY, Rigal L. 2010. Twin-screw extruder for oil processing of sunflower seeds: Thermo-mechanical pressing and solvent extraction in a single step. Ind. Crops Prod. 32: 297–304. [CrossRef] [Google Scholar]
  • Bligh EG, Dyer WJ. 1959. A rapid method of total lipid extraction and purification. Canadian J. Biochem. Physiol. 37: 911–917. [CrossRef] [Google Scholar]
  • Blumenkrantz N, Asboe-Hansen G. 1973. New method for quantitative determination of uronic acids. Anal. Biochem. 54: 484–489. [Google Scholar]
  • Bouvier JM, Campanella OH. 2014. The Generic Extrusion Process IV: Thermomechanical pretreatment and Solid-Liquid Separation. In: Extrusion Processing Technology: Food and Non-Food Biomaterials. Wiley Online Library, pp. 351–392. [Google Scholar]
  • Canella M, Castriotta G, Bernardi A, Boni R. 1985. Functional properties of individual sunflower albumin and globulin. Lebensmittel-Wissenschaft und Technologie 18: 288–292. [Google Scholar]
  • Celhay C, Mathieu C, Candy L, Vilarem G, Rigal L. 2014. Aqueous extraction of polyphenols and antiradicals from wood by-products by a twin-screw extractor: Feasibility study. Comptes Rendus Chimie 17: 204–211. [CrossRef] [Google Scholar]
  • Chabrat E, Abdillahi H, Rouilly A, Rigal L. 2012. Influence of citric acid and water on thermoplastic wheat flour/poly(lactic acid) blends. I: Thermal, mechanical and morphological properties. Ind. Crops Prod. 37: 238–246. [CrossRef] [Google Scholar]
  • Choudhury GS, Gogoi BK, Oswalt AJ. 1998. Twin screw extrusion of pink salmon muscle and rice flour blends: effects of kneading elements. J. Aquat. Food Product Technol. 7: 69–91. [CrossRef] [Google Scholar]
  • Colas D, Doumeng C, Pontalier PY, Rigal L. 2013a. Twin-screw extrusion technology, an original solution for the extraction of proteins from alfalfa (Medicago sativa). Food Bioprod. Process. 91: 175–182. [CrossRef] [Google Scholar]
  • Colas D, Doumeng C, Pontalier PY, Rigal L. 2013b. Green crop fractionation by twin-screw extrusion: Influence of the screw profile on alfalfa (Medicago sativa) dehydration and protein extraction. Chem. Eng. Process. 72: 1–9. [CrossRef] [Google Scholar]
  • Dubois M, Gilles KA, Hamilton JK, Rebers PA, Smith F. 1956. Colorimetric method for determination of sugars and related substances. Anal. Chem. 28: 350–356. [CrossRef] [Google Scholar]
  • Dufaure C, Leyris J, Rigal L, Mouloungui Z. 1999a. A twin-screw extruder for oil extraction: I. Direct expression of oleic sunflower seeds. J. Am. Oil Chem. Soc. 76: 1073–1079. [Google Scholar]
  • Dufaure C, Mouloungui Z, Rigal L. 1999b. A twin-screw extruder for oil extraction: II. Alcohol extraction of oleic sunflower seeds. J. Am. Oil Chem. Soc. 76: 1081–1086. [Google Scholar]
  • Evon P. 2008. Nouveau procédé de bioraffinage du tournesol plante entière par fractionnement thermo-mécano-chimique en extrudeur bi-vis : étude de l’extraction aqueuse des lipides et de la mise en forme du raffinat en agromatériaux par thermomoulage. Toulouse, France: Thèse de Doctorat, INP. [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2007. Direct extraction of oil from sunflower seeds by twin-screw extruder according to an aqueous extraction process: feasibility study and influence of operating conditions. Ind. Crops Prod. 26: 351–359. [CrossRef] [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2009. Aqueous extraction of residual oil from sunflower press cake using a twin-screw extruder: feasibility study. Ind. Crops Prod. 29: 455–465. [CrossRef] [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2010a. The twin-screw extrusion technology, an original and powerful solution for the biorefinery of sunflower whole plant. OCL 17: 404–417. [CrossRef] [EDP Sciences] [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2010b. Thermo-mechanical behaviour of the raffinate resulting from the aqueous extraction of sunflower whole plant in twin-screw extruder: manufacturing of biodegradable agromaterials by thermopressing. Adv. Mater. Res. 112: 63–72. [CrossRef] [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2012a. Procédé de fabrication d’un matériau solide à partir d’une plante oléagineuse et matériau solide obtenu (Method for manufacturing a solid material from an oleaginous plant, and resulting solid material). French Patent FR 2 967 689. [Google Scholar]
  • Evon P, Vandenbossche V, Rigal L. 2012b. Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: influence of thermo-pressing conditions. Polymer Degrad. Stability 97: 1940–1947. [CrossRef] [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2012c. Thermo-pressing of cake meal from sunflower whole plant, one only operation for two actions: expression of residual oil and molding of biodegradable agromaterials. Proceedings of the 18th International Sunflower Conference, Mar del Plata, Argentina, pp. 937–942. [Google Scholar]
  • Evon P, Amalia Kartika I, Cerny M, Rigal L. 2013. Extraction of oil from jatropha seeds using a twin-screw extruder: Feasibility study. Ind. Crops Prod. 47: 33–42. [CrossRef] [Google Scholar]
  • Evon P, Vandenbossche V, Pontalier PY, Rigal L. 2014. New thermal insulation fiberboards from cake generated during biorefinery of sunflower whole plant in a twin-screw extruder. Ind. Crops Prod. 52: 354–362. [CrossRef] [Google Scholar]
  • Evon P, Vinet J, Labonne L, Rigal L. 2015a. Influence of thermo-pressing conditions on mechanical properties of biodegradable fiberboards made from a deoiled sunflower cake. Ind. Crops Prod. 65: 117–126. [CrossRef] [Google Scholar]
  • Evon P, Vinet J, Rigal M, Labonne L, Vandenbossche V, Rigal L. 2015b. New insulation fiberboards from sunflower cake with improved thermal and mechanical properties. J. Agric. Stud. 3: 194–211. [CrossRef] [Google Scholar]
  • Faye M. 2010. Nouveau procédé de fractionnement de la graine de Neem (Azadirachta Indica A. Jussi) sénégalais : production d’un bio-pesticide, d’huile et de tourteau. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Gamon G, Evon P, Rigal L. 2013. Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites. Ind. Crops Prod. 46: 173–185. [CrossRef] [Google Scholar]
  • Gautam A, Choudhury GS. 1999a. Screw configuration effect on residence time distribution and mixing in twin-screw extruder during extrusion of rice flour. J. Food Process Eng. 22: 263–285. [CrossRef] [Google Scholar]
  • Gautam A, Choudhury GS. 1999b. Screw configuration effect on starch breakdown during twin screw extrusion of rice flour. J. Food Process. Preserv. 23: 355–375. [CrossRef] [Google Scholar]
  • Gogoi BK, Choudhury GS, Oswalt AJ. 1996. Effects of location and spacing of reversed screw and kneading element combination during twin-screw extrusion of starchy and proteinaceous blends. Food Res. Int. 29: 505–512. [CrossRef] [Google Scholar]
  • Jorda J. 2003. Étude du procédé d’extraction alcaline et de purification de pectines de pulpe de betterave : étude des propriétés chimiques et physico-chimiques. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Leyris J, Silvestre F, Rigal L, Gaset A. 1998. Procédé de fabrication d’objets à partir de matière première végétale par formage ou thermoformage. French Patent FR 2 784 047. [Google Scholar]
  • Manolas C. 1993. Fractionnement du sorgho à fibres : extraction et caractérisation des hémicelluloses de la moelle, étude des matériaux composites. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Manolas C, Gaset A, Jamet JP, Rigal L, N’Diaye S. 1995. Process for depithing pith containing plants, in particular sorghum. European Patent EP 0,698,681. [Google Scholar]
  • Maréchal P. 2001. Analyse des principaux facteurs impliqués dans le fractionnement combiné de pailles et de sons de blé en extrudeur bi-vis : obtention d’agromatériaux. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Maréchal V, Rigal L. 1999. Characterization of by-products of sunflower culture: commercial applications for stalks and heads. Ind. Crops Prod. 10: 185–200. [CrossRef] [Google Scholar]
  • Markessini E, Mouratidis P, Roffael E, Rigal L. 1997. Method for production of lignocellulosic composite materials. Patent WO97/38833. [Google Scholar]
  • Mechling E. 2002. Mise au point d’un réacteur multitâches adapté à la production des composés oléophiles à partir des milieux réactionnels issus des graines oléagineuses. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Nieddu M, Vivien FD. 2013. Transitions towards bioeconomy? The case of the biorefinery (Université de Reims Champagne Ardenne, ANR-09-CP2D-01-01 AEPRC2V). 1er Congrès Interdisciplinaire du Développement Durable, Quelle transition pour nos sociétés ? Namur, Belgium, pp. 131–149. [Google Scholar]
  • N’Diaye S. 1996. Fractionnement de la matière végétale : mise au point d’un procédé thermo-mécano-chimique et modélisation du fonctionnement du réacteur bi-vis. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • N’Diaye S, Rigal L. 2000. Factors influencing the alkaline extraction of poplar hemicelluloses in a twin-screw reactor: correlation with specific mechanical energy and residence time distribution of the liquid phase. Bioresour. Technol. 75: 13–18. [CrossRef] [Google Scholar]
  • Peyrat E, Rigal L, Pluquet V, Gaset A. 2000. Vegetable material from cereal plants and process for making the same. European Patent EP 0,989,228. [Google Scholar]
  • Prat L. 1998. Modélisation d’un réacteur thermo-mécano-chimique bi-vis utilisé en fractionnement de la matière végétale. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Rigal L. 1997. Technologie d’extrusion bi-vis et fractionnement de la matière végétale. 40 ans d’extrusion bi-vis chez Clextral, Firminy, France, pp. 26–33. [Google Scholar]
  • Rigal L. 2000. Twin-screw technology, a new tool for fractionation and thermo-mechano-chemical conversion of the agroressources. Proceedings of the 1st World Conference on Biomass for Energy and Industry, Sevilla, Spain. [Google Scholar]
  • Rigal L, Peyrat E, Pluquet V, Gaset A. 1999. Matériau à base de matière issue de plantes céréalières et procédé d’obtention. European Patent EP 0,989,228. [Google Scholar]
  • Rouilly A. 2002. Nouveaux agromatériaux composites à matrice protéique et polysaccharidique : étude du fractionnement, de la transformation et de la mise en forme par extrusion et par injection-moulage de la pulpe de betterave et du tourteau de tournesol. Thèse de Doctorat, INP, Toulouse, France. [Google Scholar]
  • Silvestre F, Rigal L, Leyris J, Gaset A. 1999. Colle à l’eau à base d’extrait protéique végétal et procédé de préparation. European Patent EP 0,997,513. [Google Scholar]
  • Sriti J, Msaada K, Talou T, Faye M, Amalia Kartika I, Marzouk B. 2012. Extraction of coriander oil by twin-screw extruder: Screw configuration and operating conditions effect. Ind. Crops Prod. 40: 355–360. [CrossRef] [Google Scholar]
  • Uitterhaegen E, Nguyen QH, Sampaio KA, et al. 2015. Extraction of coriander oil using twin-screw extrusion: Feasibility study and potential press cake applications. J. Am. Oil Chem. Soc. 92: 1219–1233. [CrossRef] [Google Scholar]
  • Van Soest PJ, Wine RH. 1967. Use of detergents in the analysis of fibrous feeds. IV. Determination of plant cell wall constituents. J. AOAC Int. 50: 50–55. [Google Scholar]
  • Van Soest PJ, Wine RH. 1968. Determination of lignin and cellulose in acid detergent fiber with permanganate. J. AOAC Int. 51: 780–785. [Google Scholar]
  • Vandenbossche V, Brault J, Vilarem G, et al. 2014. A new lignocellulosic biomass deconstruction process combining thermo-mechano-chemical action and bio-catalytic enzymatic hydrolysis in a twin-screw extruder. Ind. Crops Prod. 55: 258–266. [CrossRef] [Google Scholar]
  • Vandenbossche V, Brault J, Vilarem G, Rigal L. 2015. Bio-catalytic action of twin-screw extruder enzymatic hydrolysis on the deconstruction of annual plant material: case of sweet corn co-products. Ind. Crops Prod. 67: 239-248. [CrossRef] [Google Scholar]
  • Vandenbossche V, Brault J, Hernandez-Melendez O, et al. 2016. Suitability assessment of a continuous process combining thermo-mechano-chemical and bio-catalytic action in a single pilot-scale twin-screw extruder for six different biomass sources. Bioresour. Technol. 211: 146–153. [CrossRef] [PubMed] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.