Issue |
OCL
Volume 28, 2021
Sunflower / Tournesol
|
|
---|---|---|
Article Number | 39 | |
Number of page(s) | 12 | |
DOI | https://doi.org/10.1051/ocl/2021027 | |
Published online | 26 July 2021 |
Research Article
Productivity of sunflower hybrids with erectoid leaves at various plant densities☆
Productivité d’hybrides de tournesol à feuilles érigées pour différentes densités de peuplement
V.S. Pustovoit All-Russian Research Institute of Oil Crops,
Krasnodar, Russia
* Correspondence: vniimk-agro@mail.ru
Received:
22
October
2020
Accepted:
2
July
2021
We carried out the research in 2018–2019 in the Western Ciscaucasia on leached chernozem, low-humus, extra-heavy, heavy-loamy to study the possibility of cultivation of new sunflower genotypes with a compact habitus at a high plant density (80 000, 100 000 and 120 000 plants/ha) and a row width of 35 cm. We chose sunflower hybrids of the breeding of V.S. Pustovoit All-Russian Research Institute of Oil Crops with the normal (Triumph and Berkut) and the erectoid (Triumph er-2, Triumph Er-3, Berkut er-2, Berkut Er-3) leaf position as an object of research. The high lodging capacity of the erectoid hybrids Triumph еr-2 (30.2%) and Triumph Еr-3 (10.9%) suggests potential yield losses due to non-threshing of heads during the combine harvesting. The highest productivity and oil content of seeds of normal and erectoid hybrids was obtained at the plant density of 80 000 plants/ha. The densification of sowings to 100 000 and 120 000 plants/ha led to a decrease in the traits of yield structure and productivity. The limited resources of the environment do not allow achieving both high productivity and product quality in sowings with the plant density exceeding 80 000 plants/ha. The compact habitus of sunflower plants is not a determining factor in the development of productivity of sowings with a high plant density.
Résumé
Les recherches ont été menées en 2018–2019 en Ciscaucasie Occidentale sur un tchernoziom lessivé, peu humifère, de type « loam » argileux, pour étudier la possibilité de cultiver de nouveaux génotypes de tournesol à architecture compacte conduits à une densité de plantes élevée (80 000, 100 000 et 120 000 plantes/ha) et avec un inter-rang de 35 cm. Les hybrides de tournesol étaient issus de la sélection du V.S. Pustovoit All-Russian Research Institute of Oil Crops et se différenciaient par un port foliaire étalé (Triumph et Berkut) ou érigé (Triumph er-2, Triumph Er-3, Berkut er-2, Berkut Er-3). La forte sensibilité à la verse des hybrides érigés Triumph Er-2 (30,2 %) et Triumph Еr-3 (10,9 %) suggère des pertes de rendement potentielles lors de la moisson du fait du non battage des capitules. Les productivités et teneurs en huile des graines les plus élevées ont été obtenues à la densité de 80 000 plantes/ha aussi bien pour les hybrides normaux que érigés. La densification des semis à 100 000 et 120 000 plantes/ha a conduit à une diminution du rendement et de ses composantes. Les ressources limitées de l’environnement ne permettent pas d’atteindre à la fois une productivité et une qualité des graines élevées pour des densités de plantation dépassant 80 000 plantes/ha. Une architecture compacte des plantes de tournesol n’est pas apparue comme un facteur déterminant dans l’accroissement de la productivité en peuplements très denses.
Key words: sunflower / erectoid leaf type / plant density / thick planting / cultivation technology
Mots clés : tournesol / feuillage érigé / densité de peuplement / semis très dense / technique de culture
© A.S. Bushnev et al., Published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.