Issue |
OCL
Volume 12, Number 3, Mai-Juin 2005
|
|
---|---|---|
Page(s) | 242 - 247 | |
Section | Recherche | |
DOI | https://doi.org/10.1051/ocl.2005.0242 | |
Published online | 15 May 2005 |
Des sauts qualitatifs pour un usage accru des oléoprotéagineux en alimentation animale
1
CETIOM, Direction scientifique, Transformation et valorisation des graines Rue Monge, Parc industriel 33600 Pessac
05 56 07 30 84
05 56 07 97 18
2
UNIP ONIDOL, Service technique
12 avenue George V 75008 Paris
Abstract
The main result of increased production of biodiesel from rapeseed oil in the next ten years will be an important availability of rapeseed meal on the market. Its utilization in quite good economical conditions probably requires to look for gains of quality. This decision lead to either genetic, either technological works. In any case, the chosen way will be expensive; so it is important to well know the bottlenecks which are really limiting utilization of rapeseed meal in animal feeding before taking the final decision. If ruminants don’t raise significant problems, it’s not the same with poultry and pigs. In this case, rapeseed meal with very low glucosinolate content and low fiber and lignin content could bring progress for increasing the levels of meals in feedstuffs. Yellow-seeded rapeseed could be a solution. Whatever the choosen way, the gains of quality and the resulting added value have to be compared to the research costs or technological investments. In grain legumes area, FEVITA® is a good example for demonstrating the added value brought to fababean by reducing three antinutritional factors (tannins, vicine and convicine) through genetical pathway.
Key words: oilseeds / fababean / feedstuffs / bottlenecks / quality / added value
© John Libbey Eurotext 2005
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.