Open Access
Issue
OCL
Volume 23, Number 5, September-October 2016
Article Number D511
Number of page(s) 7
Section Dossier: New perspectives of European oleochemistry / Les nouvelles perspectives de l’oléochimie européenne
DOI https://doi.org/10.1051/ocl/2016022
Published online 21 June 2016
  • Adekunle K, Åkesson D, Skrifvars M. 2010. Synthesis of reactive soybean oils for use as a biobased thermoset resins in structural natural fiber composites. J. Appl. Pol. Sci. 115: 3137–3314. [CrossRef] [Google Scholar]
  • Adekunle K, Åkesson D, Skrifvars M. 2010. Biobased composites prepared by compression molding with a novel thermoset resin from soybean oil and a natural-fiber reinforcement. J. Appl. Pol. Sci. 116: 1759–1765. [Google Scholar]
  • Agarwal RK, Bammel BD, Fristad WE, Rossier GW, Siebert EJ, Yang Z. 2003. Resin-based Autodeposition Coatings. US Patent 0104212. [Google Scholar]
  • Agrawal S, Mishra A, Rai JSP. 2003. Effect of diluents on the curing behavior of vinyl ester resin. J. Appl. Pol. Sci. 87: 1948–1951. [CrossRef] [Google Scholar]
  • Aouf C, Nouailhas H, Fache M, Caillol S, Boutevin B, Fulcrand H. 2013. Multi-functionalization of gallic acid. Synthesis of a novel biobased epoxy resin. Eur. Pol. J. 49: 1185–1195. [CrossRef] [Google Scholar]
  • Baker NF. 1955. Epoxy resin compositions, US Patent 824 302. [Google Scholar]
  • Balachandran VS, Jadhav SR, Vemula PK, John G. 2012. Recent advances in cardanol chemistry in a nutshell: from a nut to nanomaterials. Chem. Soc. Rev. 42: 427–38. [CrossRef] [Google Scholar]
  • Benyahya S, Aouf C, Caillol S, Boutevin B, Fulcrand H. 2014. Functionalized green tea tannins as phenolic prepolymers for bio-based epoxy resin. Ind. Crops Prod. 53: 296–307. [CrossRef] [Google Scholar]
  • Besse V, Auvergne R, Carlotti S, Boutevin G, Otazaghine B, Caillol S, Pascault JP, Boutevin B. 2013. Synthesis of isosorbide based polyurethanes: an isocyanate free method. React. Funct. Pol. 73: 588–594. [CrossRef] [Google Scholar]
  • Brazinha C, Barbosa DS, Crespo JG. 2011. Sustainable recovery of pure natural vanillin from fermentation media in a single pervaporation step. Green Chem. 13: 2197. [CrossRef] [Google Scholar]
  • Campaner P, D’Amico D, Longo L, Stifani C, Tarzia A. 2009. Cardanol-based novolac resins as curing agents of epoxy resins. J. Appl. Pol. Sci. 114: 3585–3591. [CrossRef] [Google Scholar]
  • Carioca JOB, Vasconcelos GFC, Abreu RF, Monteiro A. 2005. Process of purification of cashew nut shell liquid (cnsl) for isolation of cardanol. CTF, 2nd Mercosur Congress on Chemical Engineering, Brazil. [Google Scholar]
  • Carrier M, Loppinet-Serani A, Denux D, et al. 2011. Thermogravimetric analysis as a new method to determine the lignocellulosic composition of biomass. Biomass Bioenergy 35: 298–307. [CrossRef] [Google Scholar]
  • Chrysanthos M, Galy J, Pascault JP. 2011. Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl ether. Polymer 52: 3611–3620. [CrossRef] [Google Scholar]
  • Darroman E, Bonnot L, Auvergne R, Boutevin B, Caillol S. 2014. New cardanol-based aromatic amines for the synthesis of biobased epoxy networks. Eur. J. Lipid Sci. Technol. 117: 178–189. [CrossRef] [Google Scholar]
  • Darroman E, Durand N, Boutevin B, Caillol S. 2015. New cardanol-based aromatic amines for the synthesis of biobased epoxy networks. Prog. Org. Coat. 83: 47–54. [CrossRef] [Google Scholar]
  • Darroman E, Durand N, Boutevin B, Caillol S. 2016. Improved Cardanol Derived Epoxy Coatings. Prog. Org. Coat. 91: 9–16. [CrossRef] [Google Scholar]
  • Fache M, Darroman M, Besse V, Auvergne R, Caillol S, Boutevin B. 2014. Vanillin, a promising biobased building-block for monomer synthesis. Green Chem. 16: 1987–1998. [CrossRef] [Google Scholar]
  • Frank F, Keenan PJ, Plant WJ. 1966. Hydroxy Polyether Polyesters having Terminal Ethylenically Unsaturated Groups. US Patent. [Google Scholar]
  • Gandini A. 2011. The irruption of polymers from renewable resources on the scene of macromolecular science and technology. Green Chem. 13: 1061–1083. [CrossRef] [Google Scholar]
  • Gaur B, Rai JSP. 1993. Rheological and thermal behaviour of vinyl ester resin. Eur. Polymer J. 29: 1149–1153. [CrossRef] [Google Scholar]
  • Greco A, Brunetti D, Renna G, Mele G, Maffezzoli A. 2010. Maffezzoli A.Plasticizer for poly(vinyl chloride) from cardanol as a renewable resource material. Pol. Degrad. Stab. 95: 2169–2174. [CrossRef] [Google Scholar]
  • Huong NL, Nieu NH, Tan TTM, Griesser U. 1996. Cardanol-phenol-formaldehyde resins. Thermal analysis and characterization. Ang. Makromol. Chem. 243: 77–85. [CrossRef] [Google Scholar]
  • Ionescu M, Petrovic ZSJ. 2011. Phenolation of vegetable oils. Serb. Chem. Soc. 76: 591–606. [CrossRef] [Google Scholar]
  • Ionescu M, Wan X, Biliç N, Petrović ZS. 2012. Polyols and rigid polyurethane foams from cashew nut shell liquid. J. Pol. Environ. 20: 647–658. [CrossRef] [Google Scholar]
  • Jaillet F, Darroman E, Ratsimihety A, Auvergne R, Boutevin B, Caillol S. 2013. New biobased epoxy materials from cardanol. Eur. J. Lipid Sci. Technol. 116: 63–73. [CrossRef] [Google Scholar]
  • Jaillet F, Nouailhas H, Auvergne R, Ratsimihety A, Boutevin B, Caillol S. 2014. Synthesis and characterization of novel vinylesterprepolymers from cardanol. Eur. J. Lipid Sci. Technol. 116: 928–939. [Google Scholar]
  • Jaillet F, Darroman E, Ratsimihety A, Boutevin B, Caillol S. 2015. Synthesis of cardanol oil building blocks for polymer synthesis. Green Materials 3: 1–29. [CrossRef] [Google Scholar]
  • Jaillet F, Nouailhas H, Boutevin B, Caillol S. 2016. 39. Synthesis and characterization of novel vinylesterprepolymers from cardanol. EJLST, in press. [Google Scholar]
  • Jeong J, Kim B, Shin S, et al. 2013. Synthesis and photo-polymerization of bio-based furanic compounds functionalized by 2-hydroxypropyl methacrylate group(s). J. Appl. Polymer Sci. 127: 2483–2489. [CrossRef] [Google Scholar]
  • Kanehashi S, Yokoyama K, Masuda R, Kidesaki T, Nagai Kazukiyo,Miyakoshi T. 2013. Preparation and characterization of cardanol-based epoxy resin for coating at room temperature curing. J. Appl. Pol. Sci. 130: 2468–2478. [CrossRef] [Google Scholar]
  • Kim YH, Won K, Kwon JM, et al. 2005. Synthesis of polycardanol from a renewable resources using a fungal peroxidase from Coprinuscireneus. J. Macromol. Cat. B 34: 33–38. [CrossRef] [Google Scholar]
  • Kim YH, An ES, Park SY, Song BK. 2007. Enzymatic epoxidation and curing of epoxide-containing polycardanol. J. Macromol. Cat. B 45: 39–44. [CrossRef] [Google Scholar]
  • Koike T. 2012. Progress in development of epoxy resin systems based on wood biomass in Japan. Polym. Eng. Sci. 52: 701–717. [CrossRef] [Google Scholar]
  • La Scala JJ, Sands JM, Orlicki JA, Robinette EJ, Palmese GR. 2004. Fatty acid-based monomers as styrene replacements for liquid molding resins. Polymer 45: 7729–7737. [CrossRef] [Google Scholar]
  • Lespinasse R, Prouvost B, Stenson P. 2011. Polyester polymer having phenolic functionality and coating compositions formed therefrom. US Patent 0315591. [Google Scholar]
  • Lukaszczyk J, Janicki B, Frick A. 2012. Investigation on synthesis and properties of isosorbide based bis-GMA analogue. J. Mater. Sci.-Mater. Med. 23: 1149–1155. [CrossRef] [Google Scholar]
  • More AS, Pasale SK, Honkhambe PN, Wadgaonkar PP. 2001. Synthesis and characterization of organo-soluble poly(ether ether ketone)s and poly(ether ether ketone ketone) s containing pendant pentadecyl chains. J. Appl. Pol. Sci. 121: 3689–3695. [CrossRef] [Google Scholar]
  • O’Connor JC, Chapin RE. 2003. Critical evaluation of observed adverse effects of endocrine active substances on reproduction and development, the immune system, and the nervous system. Pure. Appl. Chem. 75: 2099–2123. [Google Scholar]
  • Okada H, Tokunaga T, Liu X, Takayanagi S, Matsushima A, Shimohigashi Y. 2008. Direct evidence revealing structural elements essential for the high binding ability of bisphenol A to human estrogen-related receptor-gamma. Environ. Health Persp. 116: 32–38. [CrossRef] [PubMed] [Google Scholar]
  • Patel MB, Patel RG, Patel VS. 1989. Effects of reactive diluent diepoxidizedcardanol and epoxy fortifier on curing kinetics of epoxyresin. J. Therm. Anal. 35: 47–57. [CrossRef] [Google Scholar]
  • Phani Kumar P, Paramashivappa R, Vithayathil PJ, Subba Rao PV, Srinivasa R. 2002. Process for isolation of cardanol from technical cashew (Anacardiumoccidentale L.) nut shell liquid. J. Agric. Food Chem. 50: 4705–4708. [CrossRef] [PubMed] [Google Scholar]
  • Pillai CKS, Prasad VS, Sudha JD, Bera SC, Menon ARR. 1990. Polymeric resins from renewable resources. II. Synthesis and characterization of flame-retardant prepolymers from cardanol. J. Appl. Pol. Sci. 41: 2487. [CrossRef] [Google Scholar]
  • Sadler JM, Nguyen APT, Toulan FR, et al. 2013. Isosorbide-methacrylate as a bio-based low viscosity resin for high performance thermosetting applications. J. Mater. Chem. A 1: 12579–12586. [CrossRef] [Google Scholar]
  • Sato K, Aoki M, Ogawa M, Hashimoto T, Noyori R. 1996. A practical method for epoxidation of terminal olefins with 30 hydrogen peroxide under halide-free conditions. J. Org. Chem. 61: 8310–8311. [CrossRef] [PubMed] [Google Scholar]
  • Shen L, Haufe J, Patel MK. 2009. Product overview and market projection of emerging bio-based plastics, Utrecht University commissioned by European Polysaccharide network of excellence and European bioplastics. [Google Scholar]
  • Sudhakar MA, Wadgaonkar PP. 2009. Bisphenol compound and process for preparation thereof. US Patent 2009076314. [Google Scholar]
  • Sultania M, Rai JSP, Srivastava D. 2010. Studies on the synthesis and curing of epoxidizednovolac vinyl ester resin from renewable resource material. Eur. Pol. J. 46: 2019–2032. [CrossRef] [Google Scholar]
  • Sultania M, Rai JSP, Srivastava D. 2011. Process modeling, optimization and analysis of esterification reaction of cashew nut shell liquid (CNSL)-derived epoxy resin using response surface methodology. J. Hazard. Mater. 185: 1198–1204. [CrossRef] [PubMed] [Google Scholar]
  • Suresh KI. 2013. Rigid polyurethane foams from cardanol: synthesis, structural characterization, and evaluation of polyol and foam properties. ACS Sustain. Chem. Eng. 1: 232–242. [CrossRef] [Google Scholar]
  • Suresh KI, Kishanprasad VS. 2005. Synthesis, structure, and properties of novel polyols from cardanol and developed polyurethanes. Ind. Eng. Chem. Res. 44: 4504–4512. [CrossRef] [Google Scholar]
  • Tan TTM. 1996. Cardanol-lignin-based epoxy resins: synthesis and characterization. J. Polymer Mater. 13: 195–199. [Google Scholar]
  • Tuck CO, Perez E, Horvath I, Sheldon RA, Poliakoff M. 2012. Valorization of biomass: deriving more value from waste. Science 337: 695–699. [CrossRef] [PubMed] [Google Scholar]
  • Tyman JHP. 1975. Long-chain phenols : IV. Quantitative determination of the olefinic composition of the component phenols in cashew nut-shell liquid. J. Chromatgraphy 111: 277–284. [CrossRef] [Google Scholar]
  • Unnikrishnan KP, Thomas Thachil EBY. 2008. Studies on the Modification of Commercial Epoxy Resin using Cardanol-based Phenolic Resins. J. Elastomers and Plastics 40: 271–286. [CrossRef] [Google Scholar]
  • Verneker SP. 1980. Ind. J. Tech. 18: 170. [Google Scholar]
  • Voirin C, Caillol S, Sadavarte NV, Tawade BV, Boutevin B, Wadgaonkar PP. 2014. Functionalization of cardanol: towards biobased polymers and additives. Polymer Chemistry 5: 3142–3162. [CrossRef] [Google Scholar]
  • Vom Saal FS, Hughes C. 2005. An extensive new literature concerning low-dose effects of bisphenol A shows the need for a new risk assessment. Environ. Health Persp. 113: 926–933. [CrossRef] [Google Scholar]
  • Vom Saal FS, Myers JP. 2008. Bisphenol A and risk of metabolic disorders. J. Am. Med. Assn. 300: 1353–1355. [CrossRef] [Google Scholar]
  • Yadav R, Srivastava D. 2009. Synthesis and properties of cardanol-based epoxidizednovolac resins modified with carboxyl-terminated butadiene–acrylonitrile copolymer. J. Appl. Pol. Sci. 114: 1670–1681. [CrossRef] [Google Scholar]
  • Yan J, Webster D. 2014. Thermosets from highly functional methacrylatedepoxidized sucrose soyate. Green Mater. 2: 132–143. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.